Features:
Top slide with detachable 4-position tool holder
Drilling and milling head incl. manual microfeed system
With leadscrews for thread cutting
Standard equipment:
Cutting tool
Cutting table
Three-jaw chuck Ø100 mm
Center points MT 3
Drill chuckØ13 mm
Specifications TMD450 | |
Center height | 140 mm |
Center distance | 450 mm |
Swing diam. over slides | 160 mm |
Bed width / bed length | 160 mm / 800 mm |
Headstock taper | MT 3 |
Spindle capacity diam. | 19 mm |
Spindle bearing | Roller bearing |
Speed | 105, 250, 350, 500, 800, 1600 min-1 |
Top slide travel | 145 mm |
Feed over leadscrew | 0.04 - 0.25 mm/R |
Thread lead | (11) 0.4 - 2,5 mm/G |
Quill diam. | 35 mm |
Quill travel | 65 mm |
Taper | MT 3 |
Motor | 230 V, 50 Hz, 2x0.5 PS |
Rated speed | 1400 min-1 |
Milling attachment head | 400, 570, 800, 1130,1600 min-1 |
Column | 55 mm |
Table | 150 x 200 mm |
3 T-slots | 12 mm |
Sleeve travel | 75 mm |
Sleeve diameter | 65 mm |
Spindle | MT 3 |
Weight | 220 kg |
Dimensions (L x W x H) | 1030 x 400 x 750 mm |
Copyright© ALLMAC INDUSTRIES CO.,LTD. All Rights Reserved 苏ICP备05020055号
Technical Support:35.com